Products A-Z |  Search     
Home Studio Monitor Systems Service and Support Downloads  
REK 1 - Remote Electronics Kit ( 502253)
General Description

This option allows the electronics panel to be located up to 30 m (90’) away from the loudspeaker cabinet. The benefits enjoyed when loudspeakers are flush mounted are: lack of heat dissipation problems, easy adjustment of the controls, and easier electronics servicing. An 8-pole Speakon terminated cable carries the driver signals and a CAT-5 cable carries the display signals. Additional space is not required behind the cabinet as the connectors face downwards when installed.

Cable packs of length 2, 5, 10, 15, 20, and 30 m (6’, 15’, 30’, 45’, 60’, and 90’) are available, or industry standard cables maybe sourced from a third party. For the driver cable, the minimum required conductor diameter depends on the length of cable:

Cable Length  Wire Gauge
up to 20 m (30’) 2.5 mm² (16 AWG)
up to 30 m (45’) 4 mm² (15 AWG)


Operating Manual


Product Selection Guide

Studio Mounting Hardware Matrix

Recommended for:
 O 410  (Active Studio Monitor)



· General Description
         Worldwide Distributors
Imprint |  Privacy |  Legal Notes